Japanese Lantern Table Lamp

Description

Inspired by the Japanese Akari lantern tradition of 1951 — the Xuanzhi table lamp uses handmade mulberry paper that softens light into a gentle, even glow. Like the fishermen’s bamboo lanterns that first inspired the design, it transforms any space with a warm, tranquil presence.

“The fishermen used lanterns to attract fish — ribs made of bamboo covered with fine paper. For this lamp, mulberry tree paper is used, because it softens the light, making it gentle and spreading it evenly.”

See It In Action: Japanese elegance meets modern design

Eastern charm & modern elegance

Styling & light quality: Additional showcase

Features

Mulberry Paper Shade

Handmade washi paper softens light into a gentle, even ambient glow — the same technique used in traditional Japanese lanterns.

8 Sizes

From compact (∅10.2″) to statement-scale (∅33.1″) — a size for every space and surface.

Plug-In: 59″ cord with inline on/off switch — place anywhere without hardwiring.

Glue traces notice: Glue traces at shade edge — normal handcraft characteristic

The shade undergoes a meticulous hand-bonding process using paper and glue. Minor glue traces along the edge of the lampshade are a normal result of this handcraft process — not a quality issue.

Glue trace image: Wiring callout

Wiring Connection Guide: Black wire

→ connect to: Hole 2

White wire: Hole 3

Sizes

Available Sizes

Diameter × Height

Notes

∅10.2″ × H14.6″ (26 × 37 cm): Small S

∅10.2″ × H16.9″ (26 × 43 cm): —

∅11.8″ × H21.6″ (30 × 55 cm): ∅13.0″ × H22.8″ (33 × 58 cm)

∅15.7″ × H22.8″ (40 × 58 cm): Medium M

∅16.5″ × H23.6″ (42 × 60 cm): ∅17.3″ × H26.8″ (44 × 67 cm)

∅33.1″ × H47.2″ (84 × 120 cm)

Large L: Size reference — standard proportions

Small / Medium / Large comparison

Styled interior

Specifications

Materials

Handmade mulberry paper shade · Metal · Iron base

Light source: E26 / E27 base · LED or Edison bulb

Voltage: AC 110–240V

Power source: Plug-in · 59″ (150 cm) cord · Inline on/off switch

No hardwiring required: Wiring

Black wire → Hole 2 · White wire → Hole 3

Body finish: Black

Shade finish: White mulberry paper

IP rating: IP20 · Indoor use only · Not waterproof

Certification: North America · EU · AU · Saudi Arabia

Setup Notes

Plug-in — no installation required. Plug into any standard wall outlet and use the inline switch on the 59″ cord.

When wiring the lamp holder: connect the

black wire to hole 2: and the

white wire to hole 3: . See the wiring diagram above.

Minor glue traces at the shade edge are a normal handcraft characteristic — not a defect.

Handle the paper shade gently — mulberry paper is delicate. Avoid direct contact with water.

For indoor use only. Not suitable for bathrooms or damp locations.

Downloads: Frequently Asked Questions

Why are there glue traces at the edge of the shade?

The shade is handmade using a paper and glue bonding process. Minor glue traces along the edge are a normal characteristic of this handcraft — not a quality issue.

How do I connect the wires?

Connect the black wire to hole 2 and the white wire to hole 3. See the wiring diagram in the Setup section above.

What is the shade made from?

Handmade mulberry paper (washi). Mulberry paper softens light into a gentle, even glow — the same material used in traditional Japanese lanterns. Handle with care and keep away from direct moisture.

Is this plug-in or hardwired?

Plug-in. A 59″ cord with an inline on/off switch is included — just plug into any outlet.