Keltis 48/52 Ceiling Fan Light

Description

Headline: DC motor, wood grain blades —

cooling and light in one.

Intro

The Keltis Ceiling Fan Light pairs a pure copper DC motor with five sweeping ABS blades finished in water-transfer wood grain, suspended beneath an acrylic LED diffuser. Six-speed airflow control via handheld remote, integrated LED in three colour temperatures — a single fitting that handles both climate and light in modern and transitional interiors.

CRITICAL NOTICES: Install blade gaskets — required to protect the motor

When fitting the blades, gaskets

must

be installed to secure them. Without gaskets, the motor copper wiring will be damaged. Do not skip this step.

Ceiling compatibility — check before ordering

Cannot be installed on joists + gypsum board or wood panel ceilings (noise and wobble issues).

Cannot be installed on prefabricated ceilings. Cement concrete and solid wood beams are acceptable.

Sloped ceilings are not supported in the standard version — contact customer service for a downrod accessory.

Beam width must be at least 6 cm. Ceiling must support over 20 kg.

If the ceiling has round or square grooves, contact customer service with the groove diameter and depth before ordering.

WALL SWITCH NOTICE BLADE / BODY COLOR NOTICE

Blade and body colour — slight variation is normal

The lamp body is metal with a water-transfer wood grain finish; the blades are ABS material with the same wood grain print. Due to the different base materials, a subtle colour difference between the body and blades is normal and expected. An exact match across these two materials is not achievable.

FEATURES

Pure Copper DC Motor: DC motor delivers efficient, quiet operation at all six speed settings.

Wood Grain ABS Blades

Water-transfer printed wood grain finish — the look of real wood with the durability of ABS.

6-Speed Remote

Handheld remote controls fan speed (6 levels), light on/off, and colour temperature.

SIZES: 48″  /  ∅ 122 cm

H 30 cm  ·  ~30W  ·  Medium rooms

52″  /  ∅ 132 cm: H 30 cm  ·  ~30W  ·  Larger rooms

Canopy: ∅ 4.7″ × H 2.3″ (12 × 6 cm)  ·  Downrod: 10+20 cm adjustable (30 cm total, extendable on request)

MODEL GRID: Models (A – F)

All six models available in both 48″ and 52″. Tap any image to enlarge.

Model A: 48″ / 52″  ·  ~30W

Model B: Model C

Model D: Model E

Model F: FINISH

Finishes: Walnut Wood Grain

Deep walnut ABS blades + matte black housing

Natural Wood Grain: Light oak ABS blades + wood-tone housing

White: White housing and blades

Black: Matte black housing and blades

COLOUR TEMPERATURE: Select at time of order. Integrated LED fixed at manufacture.

3000K — Warm: Cosy amber glow for living rooms and bedrooms.

4000K — Neutral: Balanced white for kitchens and home offices.

6000K — Cool: Crisp daylight for task areas and studios.

SPEC TABLE (no IP rating row)

Specifications

Materials

Metal frame, ABS blades, acrylic shade, pure copper motor

48″ (∅ 122 cm)  ·  52″ (∅ 132 cm)  ·  H 30 cm

Motor: DC pure copper motor

Fan speed: 6-speed

Light source: Integrated LED, ~30W

3000K / 4000K / 6000K — select at order

Total power: 35W variable frequency

Voltage: AC 110–240V, 60Hz

Control: Handheld remote (included)

Wall switch

Wireless Wall Switch only (sold separately) — standard home switches not compatible

Downrod: 10+20 cm adjustable (30 cm total) — extendable on request

Canopy: ∅ 4.7″ × H 2.3″ (12 × 6 cm)

Wiring: Hardwired

Mounting: Ceiling (flat ceiling only in standard version)

Environment: Indoor only

Walnut Wood Grain / Natural Wood Grain / White / Black

Certification: North America · EU · AU · Saudi Arabia

DOWNLOADS: FAQ

Frequently Asked Questions: Can I use a standard wall switch to control this fan?

No. The Keltis fan light’s receiver is not compatible with standard home wall switches. If you want wall-mounted control, you must purchase our Wireless Wall Switch separately from our website. The fan includes a handheld remote as standard.

Do I need to install gaskets when fitting the blades?

Yes — this is essential. Gaskets must be fitted between the blades and the motor housing when installing. Without gaskets, the motor copper wiring will be damaged and the fan may not work correctly.

Can the Keltis be installed on a sloped ceiling?

Not in the standard version. The Keltis has a downrod variant that can accommodate sloped ceilings — contact customer service before ordering to confirm compatible accessories.

My ceiling is gypsum board on joists — can I install this fan?

No. The Keltis fan cannot be installed on ceilings made of joists + gypsum board, wood panels, or prefabricated ceilings — these surfaces cause noise and wobbling. Cement concrete ceilings and solid wood beams are acceptable. The beam width must be at least 6 cm and the ceiling must support over 20 kg.

Why do the blades and body look slightly different in colour?

The lamp body is metal with a water-transfer wood grain finish; the blades are ABS with the same grain print. Because the base materials differ, a subtle colour variation between them is normal and expected — an exact match is not achievable across the two materials.

Is the Keltis certified for North America and Europe?

Yes. The Keltis Ceiling Fan Light holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V, 60Hz worldwide.