Description
SOLID ALABASTER · BRONZE-FINISH HARDWARE · 63″ VERTICAL · HARDWIRED · INTEGRATED LED
A 63-inch alabaster capsule with a slim bronze spine — a vertical sconce designed to
flank tall mirrors and stairwells
Lyra is a vertical wall sconce built around a 63-inch alabaster capsule — translucent stone that glows softly across its full length when lit. A slim bronze-finish steel spine runs down its center, anchored at four bronze disc points to the wall. Hardwired installation by a licensed electrician.
Sized for tall mirror flanking, stairwell pairings, and dramatic entry foyers — anywhere a single statement vertical light reads better than a row of shorter sconces. The capsule is just 7.1″ wide and 4.3″ deep, so it sits flat against most architectural walls.
Solid Alabaster Capsule
Cut from natural alabaster — translucent stone with fibrous veining unique to each piece. Glows softly along its full 63-inch length.
Bronze-Finish Spine
Slim vertical bronze-finish steel spine with four disc anchor points — provides architectural rhythm against the soft glow of the alabaster.
Hardwired Installation
Connects to a standard junction box — requires a licensed electrician. Integrated LED with ~50,000 hour rated life.
What it’s made of: Capsule
Solid natural alabaster — translucent, hand-cut, fibrous veining unique to each piece
Hardware: Bronze-finish steel — spine, disc anchors, and wall mount
Light Source: Integrated LED strip distributed along the inner capsule
Each alabaster capsule is one-of-a-kind.
Alabaster is natural translucent stone formed over millennia — fibrous veining direction, tonal warmth, and translucency vary between every piece we cut.
About the bronze-finish hardware.
The spine, disc anchors, and wall mount are bronze-finish steel — not solid bronze. The antique-bronze tone is a durable powder-coated finish.
Installation: HARDWIRED · LICENSED ELECTRICIAN REQUIRED
Junction Box Installation
Lyra connects to a standard recessed junction box. Total fixture weight is approximately 12 lb (5.5 kg). The wall mount is anchored at the top, with three additional disc points stabilizing the 63-inch length. We recommend installation by a licensed electrician.
Renovating?
Best installed during electrical rough-in. For retrofitting, your electrician may need 30-60 minutes per sconce to secure the anchoring system.
Color temperature: DEFAULT
3000 K Warm White
Soft amber-toned glow that complements the natural cream of alabaster. Integrated LED strip distributed along the full length. Rated for roughly 50,000 hours.
Need a different color temperature?
4000 K neutral or 6000 K cool white available on request — message us before placing your order.
Dimensions
Click to enlarge ↗: Width
18 cm / 7.1″: Height
160 cm / 63″: Depth
11 cm / 4.3″: Weight
~5.5 kg / 12 lb: 将规格表与下载链接移动到 FAQ 上方
Specifications
Solid natural alabaster — single-piece
Bronze-finish steel — spine, four disc anchors, wall mount
Integrated LED strip · ~50,000 hours rated life
3000 K (default) · 4000 K / 6000 K on request
Voltage: AC 110–240 V worldwide
Hardwired — licensed electrician required
Environment: Indoor — damp-rated for bathroom away from direct spray
Certifications: North America · Saudi Arabia · Europe · Australia
Downloads: Spec Sheet
Frequently asked: Where does Lyra look best?
Flanking tall bathroom mirrors, side of a stairwell landing, or framing a grand entry foyer. It needs vertical “breathing room” to read correctly.
Can I dim this light?
Yes, Lyra is compatible with most Triac-based wall dimmers. Smart dimmers like Lutron Caséta work as well.
How do I clean it?
Wipe gently with a soft dry cloth. For deep cleaning of stone, a slightly damp cloth with water only. Avoid acidic cleaners.
Is it certified for global use?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.
Reviews
There are no reviews yet.