Tapered Wood Linear Pendant Lamp

Description

1. Hero intro: ≤500 chars; main keyword + long-tail + scene words

A slim wood linear LED pendant light in a warm wood-color finish, shaped from a single bar that tapers gently toward each end for a light, floating line overhead. A recessed integrated LED runs the full underside for even, gap-free downlight. Three lengths — 47″, 59″, and 71″ — suit dining tables, kitchen islands, and hallways, hung on an adjustable black cable at a warm 2700K.

4. Features: 3 benefit cards

Features

Tapered wood bar

A single wood bar that narrows toward both ends, reading as a slim, floating line over the table.

Recessed LED line

The integrated LED sits in a channel along the underside, so light spreads evenly with no hot spots or glare.

Warm 2700K light

Integrated LED runs warm white at 2700K — easy, relaxed light for dining and task work.

5. Variant / Control options: Length Options

Three set lengths

47″ · 59″ · 71″. The bar runs 4.7″ wide × 1.6″ thick at the center, tapering toward the ends.

Cable drop

The black suspension cable adjusts on-site for tables and islands. Shorten excess at the canopy.

6. Default config + custom finish notices

Default configuration

Pictured: 59″ bar in a wood-color finish on a black cable, 2700K integrated LED. Other lengths made to order.

Sizing help & custom lengths

Pick a bar about 12″ shorter than your table so it clears each end. Unsure which length fits, or need a custom size? Email us your table dimensions for a free recommendation.

10. Available Configurations matrix

Wood Linear Pendant Sizes & Configurations

Length: Profile (W × H)

Metric (L × W × H): Best for

47″: 4.7″ × 1.6″

120 × 12 × 4 cm: 4–6 seat tables, breakfast nooks

59″: 150 × 12 × 4 cm

6–8 seat tables, kitchen islands

71″: 180 × 12 × 4 cm

8+ seat tables, long islands, hallways

10b. Shape Diagrams: Shape Diagrams

Click any diagram to enlarge.

12. Specifications

Specifications

Material: Wood, Metal

Body finish: Wood color

Shade finish: Wood-color tapered bar with frosted LED diffuser strip

Light source: Integrated LED · 2700K warm white

Lengths: 47″ / 59″ / 71″ (120 / 150 / 180 cm)

Profile: 4.7″ W × 1.6″ H (12 × 4 cm), tapered ends

Voltage: AC 110–240V (universal)

Mounting: Hardwired ceiling mount, adjustable black cable

Moisture rating: IP20 — indoor, dry/damp locations only

LED life: Rated L70 ≥ 30,000 hours; replaceable at authorized service

Certification: Listed · North America · CE · SAA · SASO · KC

13. Installation Notes: Installation Notes

Hardwired ceiling install — a licensed electrician is recommended.

Hang the bar 30–36″ above a dining table; raise it for kitchen islands or walkways.

The black cable adjusts at the canopy; feed excess cable into the ceiling box to level the bar.

Sloped ceiling compatible up to 15° with the standard canopy; send the pitch angle for steeper slopes.

Choose a bar about 12″ shorter than the table length so it clears diners at both ends.

Real wood grain, tone, and figure vary by piece; the photograph shows a representative sample, not the exact bar shipped.

14. Downloads & Resources (file-delivery only)

Downloads & Resources: 15. FAQs (exactly 5)

FAQs: Is the tapered wood linear LED pendant bright enough to light a dining table?

Yes. The recessed integrated LED runs the full length of the bar, so light spreads evenly down the table with no dark gaps. At 2700K it gives a warm, relaxed dining light over the whole surface.

What length should I choose for my table or kitchen island?

Pick a bar about 12″ shorter than the surface so it clears both ends. 47″ suits 4–6 seat tables, 59″ fits most 6–8 seat tables and islands, and 71″ covers 8+ seat tables and long hallways.

What does the tapered shape add over a straight bar?

The bar is widest at the center and narrows toward each end, so it looks slimmer and lighter than a straight block of the same size. The effect is a soft, floating line that draws less visual weight while still spanning the full table.

Can this mount on a sloped or vaulted ceiling?

The standard canopy handles flat ceilings and pitches up to 15°. For steeper slopes we include a sloped-ceiling adapter free of charge — send us the pitch angle when you place the order.

What is the warranty, and what happens at the end of the LED’s life?

2-year warranty on the fixture and wiring. The LED is rated for L70 ≥ 30,000 hours and is replaceable at authorized service if it ever needs it. Email support replies within one business day.