Arcadia Luxe Floor Lamp

Description

Arc Floor Lamp —: white marble base, stainless steel arc arm, polished dome.

A rectangular white marble block — beveled at the corners, with a finger-hole through its face for repositioning — anchors the base. From it a stainless steel arm rises vertically and then curves in a long arc overhead, extending several feet out from the base before descending to the polished dome shade. The arm and dome are brushed stainless steel; the dome directs warm light downward. Plug-in, three sizes, and available in round or square section arm. The marble base provides sufficient weight to counterbalance the arc without wall attachment.

SHIPPING CRITICAL NOTICE: Heavy freight — marble base ships by truck only

The genuine marble base is extremely heavy. This product

cannot be shipped by standard parcel courier

MARBLE NOTICE: Genuine marble — veining and pattern vary between pieces

The base is cut from genuine white marble. The grey veining, mineral inclusions, and tonal variation of each block are determined by where it was cut from the stone slab — no two bases are identical. Product photographs show representative examples. Your lamp’s base will have its own vein pattern.

PLUG-IN: Plug-in — no installation required

Runs on a 59″ cord with a push-button switch. Place anywhere, plug in. No hardwiring or electrician required.

FEATURES

Marble Base

Genuine white marble with beveled corners and a carry-hole — heavy enough to counterbalance the arc.

Stainless Arc Arm

Brushed stainless steel — round or square section. Extends overhead, positions the shade over a sofa or chair.

Polished Dome Shade

Brushed stainless steel dome directs warm light downward — reading, dining, or ambient.

ARM STYLE SELECTOR: Arm Style — Round Pipe or Square Tube

Select arm style at time of order. Both share the same marble base, dome shade, and three available sizes. Tap to enlarge.

Comparison: Left: Round pipe arm — circular cross-section, softer profile.

Right: Square tube arm — rectangular cross-section, more angular and architectural.

Round Pipe

Circular section arm — the classic arc floor lamp profile. Slightly softer visual line.

Square Tube: Rectangular section arm — harder edge, more contemporary and architectural feel.

THREE SIZES: Sizes

W = horizontal reach of the arc. H = total height from floor to arc peak. Tap each diagram to enlarge.

Small: W 165 × H 190 cm  /  W 64.9″ × H 74.8″

Suited for standard-height ceilings (240–270 cm) · compact living rooms · reading chairs

Medium: W 180 × H 210 cm  /  W 70.9″ × H 82.6″

Suited for 270–300 cm ceilings · larger sofas · open-plan living

Large: W 210 × H 230 cm  /  W 82.7″ × H 90.6″

Suited for high ceilings (300 cm+) · double-height spaces · dining tables · grand living rooms

BULB CARD: Bulb & Light Source

E26 (US/CA) or E27 (EU/AU) — max 40W, bulb not included

Compatible with LED and Edison filament bulbs up to 40W total. A warm-white LED at 2700–3000 K at 8–15W provides comfortable reading and ambient light from the downward dome position. The polished interior of the dome reflects and concentrates light downward — a globe or standard A-shape E26/E27 LED distributes well within the dome. A large Edison filament globe (G25 or G30 shape) is visible from the side through the dome opening and adds visible filament character if that is your preference. Do not exceed 40W total to avoid overheating the dome shade.

Guide to E26 and E27 bulb selection →

SPEC TABLE (no IP row)

Specifications

Materials

Genuine White Marble, Stainless Steel

Small: W 165 × H 190 cm  /  W 64.9″ × H 74.8″

Medium: W 180 × H 210 cm  /  W 70.9″ × H 82.6″

Large: W 210 × H 230 cm  /  W 82.7″ × H 90.6″

Arm style options: Round Pipe  ·  Square Tube — select at order

Bulb base: E26 (US/CA) or E27 (EU/AU)

Max power: 40W

Light source: LED or Edison filament bulb (not included)

Voltage: AC 110–240V

Cord: 59″ with push-button on/off switch

Power supply: Plug-in — no hardwiring required

Mounting: Freestanding floor lamp

Environment: Indoor only

Base finish: White Marble (genuine — vein pattern varies per piece)

Arm & shade finish: Brushed Stainless Steel (Silver)

Shipping: ⚠  Truck freight only — marble base is too heavy for parcel courier

Certification: North America · EU · AU · Saudi Arabia

DOWNLOADS: FAQ

Frequently Asked Questions: Will the lamp tip over if I position it over a sofa?

The marble base is specifically sized and weighted to counterbalance the arm at its full horizontal extension without wall attachment or tipping. The marble block’s mass anchors the base while the arm extends overhead. Do not lean on the arm or apply lateral force to the shade — this shifts the center of mass and can destabilize the base. Position the base on a flat, level floor surface. Do not place on rugs with thick pile that can allow the base to shift. For homes with children or pets, position the base in a corner or against a wall as additional security.

How do I move the lamp after delivery given the heavy base?

Which size should I choose for my ceiling height?

The H dimension is the total height from floor to the peak of the arc (not the shade position). At H 190 cm, the lamp works under a standard 240 cm ceiling with reasonable clearance. At H 210 cm, it is suited for ceilings of 270 cm or higher. At H 230 cm, a ceiling of at least 280–300 cm is recommended to avoid the arm touching the ceiling at its peak. Measure your ceiling height before selecting — the arc rises to its peak before descending to the shade, so the peak height is the critical clearance dimension.

Is the Arc Floor Lamp certified for North America and Europe?

Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.