Beveled Wood Linear Pendant Lamp

Description

1. Hero intro: ≤500 chars; main keyword + long-tail + scene words

A beveled wood linear LED pendant light in a warm walnut-color finish, with an angled open channel cut along the top face and the integrated LED set into the bevel. Light grazes out of the channel for a soft, directional wash rather than a bare strip. Three lengths — 47″, 59″, and 71″ — suit dining tables, kitchen islands, and hallways, hung on an adjustable black cable at a warm 2700K.

4. Features: 3 benefit cards

Features

Beveled channel

An angled groove runs the length of the bar, seating the LED in a clean recessed line.

Directional wash

The angled face aims a soft wash of light along the table, easing glare from a bare strip.

Warm 2700K light

Integrated LED runs warm white at 2700K — easy, relaxed light for dining and task work.

5. Variant / Control options: Length Options

Three set lengths: 47″ · 59″ · 71″. The beveled bar stays 4.7″ wide × 1.6″ thick at every length.

Cable drop

The black suspension cable adjusts on-site for tables and islands. Shorten excess at the canopy.

6. Default config + custom finish notices

Default configuration

Pictured: 59″ bar in a walnut-color finish on a black cable, 2700K integrated LED. Other lengths made to order.

Sizing help & custom lengths

Pick a bar about 12″ shorter than your table so it clears each end. Unsure which length fits, or need a custom size? Email us your table dimensions for a free recommendation.

10. Available Configurations matrix

Wood Linear Pendant Sizes & Configurations

Length: Profile (W × H)

Metric (L × W × H): Best for

47″: 4.7″ × 1.6″

120 × 12 × 4 cm: 4–6 seat tables, breakfast nooks

59″: 150 × 12 × 4 cm

6–8 seat tables, kitchen islands

71″: 180 × 12 × 4 cm

8+ seat tables, long islands, hallways

10b. Shape Diagrams: Shape Diagrams

Click any diagram to enlarge.

12. Specifications

Specifications

Material: Wood, Metal

Body finish: Walnut color

Shade finish: Walnut-color beveled bar with frosted LED diffuser strip

Light source: Integrated LED · 2700K warm white

Lengths: 47″ / 59″ / 71″ (120 / 150 / 180 cm)

Profile: 4.7″ W × 1.6″ H (12 × 4 cm), beveled channel

Voltage: AC 110–240V (universal)

Mounting: Hardwired ceiling mount, adjustable black cable

Moisture rating: IP20 — indoor, dry/damp locations only

LED life: Rated L70 ≥ 30,000 hours; replaceable at authorized service

Certification: Listed · North America · CE · SAA · SASO · KC

13. Installation Notes: Installation Notes

Hardwired ceiling install — a licensed electrician is recommended.

Hang the bar 30–36″ above a dining table; raise it for kitchen islands or walkways.

The black cable adjusts at the canopy; feed excess cable into the ceiling box to level the bar.

Orient the beveled channel toward the seating side if you want the wash aimed across the table.

Choose a bar about 12″ shorter than the table length so it clears diners at both ends.

Real wood grain, tone, and figure vary by piece; the photograph shows a representative sample, not the exact bar shipped.

14. Downloads & Resources (file-delivery only)

Downloads & Resources: 15. FAQs (exactly 5)

FAQs: Is the beveled wood linear LED pendant bright enough to light a dining table?

Yes. The integrated LED runs the full length of the channel, so light spreads evenly down the table with no dark gaps. At 2700K it gives a warm, relaxed dining light over the whole surface.

What length should I choose for my table or kitchen island?

Pick a bar about 12″ shorter than the surface so it clears both ends. 47″ suits 4–6 seat tables, 59″ fits most 6–8 seat tables and islands, and 71″ covers 8+ seat tables and long hallways.

What does the beveled channel do for the light?

The LED sits inside an angled groove rather than flush on the underside, so the light reads as a soft directional wash instead of a bright exposed line. You see the glow and the wood, not the diode, which cuts glare at the table.

Can this mount on a sloped or vaulted ceiling?

The standard canopy handles flat ceilings and pitches up to 15°. For steeper slopes we include a sloped-ceiling adapter free of charge — send us the pitch angle when you place the order.

What is the warranty, and what happens at the end of the LED’s life?

2-year warranty on the fixture and wiring. The LED is rated for L70 ≥ 30,000 hours and is replaceable at authorized service if it ever needs it. Email support replies within one business day.