Nomad Magnet Rechargeable Wall Lamp

Description

1. Hero intro

A walnut-wood wall sconce that magnetically detaches into a portable handheld light. The lamp body lifts off the wall plate with a gentle pull — use it as a fixed sconce when mounted, or carry it as a wand for late-night hallways, closets, or bedside reading. Battery-powered with USB-C charging and 4-hour runtime. Touch sensor on the wood handle switches between three color temperatures (3000K / 4000K / 6000K) and dims by hold. No wiring, no electrician — mount the plate with screws or adhesive.

3. Critical expectations: ⚠ What this lamp is — and what it isn’t

Ambient and accent light, not main illumination.

The integrated 1W LED produces nightlight-to-low-ambient brightness — bright enough to navigate a dark hallway, find your way to the bathroom, or set evening mood, but not bright enough to read a book by alone.

For reading, pair it with a primary reading lamp. For mood lighting, ambient hallway use, or as a portable emergency light, this is its purpose.

4. Features

Features

Magnetic detach

Pull the wand off the wall plate at any time — carry it to bed, hallway, or closet. Snaps back into place with a satisfying click.

USB-C rechargeable

4-hour runtime per charge. Charges from any USB port — power bank, laptop, or wall adapter. Cable included.

3 color temperatures + dim

Tap the wood handle to cycle between 3000K warm, 4000K neutral, and 6000K cool. Hold to dim.

5. Where it works: Where it works best

Hallway nightlight: Late-night bathroom trips, sleeping pets, kids’ rooms

Closet interior: Stick to closet door — no wiring through cabinetry

Bedside accent: Wall-mounted above a nightstand; detach for handheld use

Rental-friendly: Adhesive mount option leaves no holes; takes 5 minutes to install

Stairway / entryway: Two together for symmetric ambient light without wired conduit

Emergency backup: Always charged on the wall; grab during power outage

5. Configuration: Configuration

Touch control on the wood handle

Single tap = on/off. Double tap = cycle color temperature. Long press = dim from 100% down to 10%.

Mount: screw or adhesive

Wall plate mounts with 2 screws (drywall anchors included) or via 3M VHB adhesive strip (included). Adhesive holds 1+ lb.

Finish: Walnut wood

Light wood: White diffuser (fixed)

12. Specifications

Specifications

Dimensions

Ø1.0″ × 7.1″ tall (2.5 × 18 cm) · wall plate Ø3.5″

Material

Walnut or light wood handle and wall plate · metal internal frame · frosted acrylic diffuser

Light source: Integrated LED — 1W, ~80 lumens

Color temperature: 3000K warm · 4000K neutral · 6000K cool — switchable via touch

Battery: Built-in rechargeable lithium-ion · ~4-hour runtime per charge

Charging: USB-C (cable included) — ~2.5 hours to full charge

Mounting: Screws (drywall anchors included) or 3M VHB adhesive (included)

Control: Touch sensor on the wood handle — tap, double-tap, hold

Body finish: Walnut wood (dark) or Light wood — choose at checkout

Certification: Certified for North America, EU, Australia, and Saudi Arabia

Warranty: 1 year on battery · 2 years on LED and fixture

13. Installation: Setup & Use

Screw mount:

Hold the wall plate where you want it, mark the two screw points with a pencil, drill pilot holes, install drywall anchors if needed, then screw the plate to the wall. Snap the lamp onto the magnet.

Adhesive mount:

Clean the wall with isopropyl alcohol, peel the backing from the 3M VHB strip on the plate, press firmly for 30 seconds. Wait 2 hours before attaching the lamp.

Charge for 2.5 hours before first use. Subsequent charges take similar time. Keep charged for emergency-light reliability.

Indoor dry locations only. Not for bathrooms with direct shower spray or outdoor use.

15. FAQs: FAQs

How long does the battery last and what’s the charging time?

~4 hours of runtime at full brightness on a single charge. Dimming extends runtime significantly — at 25% brightness, expect 12+ hours. Charging from empty takes ~2.5 hours via USB-C from any standard USB-A or USB-C port (5V/1A or higher).

Will the adhesive hold over time?

The included 3M VHB adhesive holds 1+ lb of pull weight on clean, smooth surfaces (painted drywall, painted wood, tile). It will not hold on textured wallpaper, rough plaster, or unpainted brick. For long-term peace of mind on a critical mount, use the screw option instead.

Can the battery be replaced when it eventually wears out?

Is it bright enough for reading?

No — at 1W (~80 lumens) it’s ambient/nightlight level, not task-bright. For comparison: a typical reading lamp is 8–15W LED (~400–800 lumens). Use the Nomad for mood lighting, nightstand accent, hallway navigation, and as a portable backup; pair with a primary reading lamp for reading.

What’s the warranty?

16. Schema.org JSON-LD