Pebble-Inlay Sculptural Plaster Table Lamp

Description

1. Hero intro: <=500 chars; main keyword + long-tail + scene words

A sculptural plaster table lamp with an asymmetric, hand-formed body set with charcoal pebble insets, topped by a pleated dome shade. The cast gypsum-resin base reads like hand-thrown stoneware and casts a warm, low glow. Standing 16.9–21.3″ tall, it works as an accent lamp on a living-room console, entryway table, or bedroom dresser. Size and finish are made to order.

Features

Hand-formed organic body

Asymmetric gypsum-resin form with inset charcoal pebble detailing and a matte plaster surface.

E26/E27, max 12W: Standard medium-base socket. Warm 2700K LED recommended for a soft, low glow.

Made-to-order sizing: Three heights from 16.9 to 21.3″; custom base and shade finishes on request.

detail image (carries main keyword in ALT per Rule 12/13)

Pebble-inlay base detail

5. Variant / Control options — removed (single style; size & finish handled in section 6/9) 6. Default config + custom finish notices

Default configuration

Pictured: mid height (19.3″), off-white plaster body with charcoal pebble insets and a pleated off-white dome shade.

Custom size & finish

Choose from three heights; base tone, pebble color, and shade finish can be customized. Email us your space dimensions for a made-to-order quote.

7. Quality / warranty notice — removed (covered in Specifications + FAQ 5) 8. Installation reference image — removed (plug-in tabletop lamp; no diagram needed) 9. Finish & Color selection — folded into section 6 custom-finish notice

10. Available Configurations matrix

Sizes & Configurations: Size

Height (overall): Shade Dimensions

Best for: Small

16.9″ (43 cm): Ø 15.7″ (40 cm)

Nightstand, narrow shelf: Medium

19.3″ (49 cm): Ø 17.7″ (45 cm)

Console, dresser, end table: Large

21.3″ (54 cm): Ø 19.7″ (50 cm)

Entryway, statement corner

Shade diameter 15.7–19.7″ (40–50 cm). All sizes made to order; intermediate sizes available on request.

11. Trust signals row — removed (certification in Specifications; warranty/returns in FAQ 5)

12. Specifications

Specifications

Material: Cast gypsum-resin composite body · metal hardware

Finish: Off-white matte plaster with inset charcoal pebble detail

Shade: Pleated dome shade, off-white textured fabric-look

Light source: E26/E27 medium base — LED or incandescent, max 12W (bulb not included)

Voltage: AC 110–240V

Switch: Inline cord switch

Mounting: Freestanding tabletop (plug-in)

Dimensions

H 16.9–21.3″ (43–54 cm) · shade Ø 15.7–19.7″ (40–50 cm)

Customization: Three heights; custom base & shade finish made to order

Certification: Certified for North America, EU, and Australia

Prop 65 (CA): WARNING applies for California — see P65Warnings.ca.gov

13. Installation Notes: Setup & Care Notes

Lift by the base, not the shade; the pleated dome is sculpted, not load-bearing.

Plug-in lamp — no hardwiring. Operates from a standard wall outlet via the inline cord switch.

Bulb not included. Use an E26/E27 LED rated 12W or less; 2700K warm white best matches the matte plaster tone.

Set on a stable, level surface. The weighted gypsum-resin base resists tipping.

Each piece is hand-finished — brushwork, texture, and tone vary slightly from unit to unit. This is characteristic of the process, not a defect.

Dust with a dry, soft cloth. Avoid water, solvents, and abrasive cleaners on the plaster finish.

14. Downloads & Resources: Downloads & Resources

Spec Sheet Care Guide Request a Quote

15. FAQs (exactly 5): FAQs

Is one bulb bright enough for a living room?

It takes a single E26/E27 bulb (max 12W) and is built as accent and ambient lighting, not a room’s main source. Pair it with overhead or a second lamp for full living-room coverage.

What height should I pick for a console or nightstand?

For a nightstand or narrow shelf choose 16.9″. For a console, dresser, or end table the 19.3″ mid height suits most setups. The 21.3″ large reads as a corner statement.

Can I change the base tone or pebble color?

Yes. Base tone, pebble accent color, and shade finish are made to order. Email us your preference and the height you want for a quote.

Does it need assembly or an electrician?

No. It ships ready to use as a plug-in lamp with an inline cord switch — just add an E26/E27 bulb and plug into a standard outlet.

What’s the warranty and how do I clean it?

16. Schema.org JSON-LD (GEO core)