Pleated Fan Floor Lamp

Description

1. Hero intro: ≤500 chars; main keyword + long-tail + scene words

A floor-standing fan floor lamp with a pleated, folding-fan shade in white fabric, set on a slim black alloy pole and a weighted round base. One G9 LED bulb (10W) backlights the fan for a soft uplight glow, with three switchable color temperatures — warm, neutral, and cool white — cycled by a foot pedal. At 71″ tall and 24″ wide, it fits a living room corner, a bedroom reading nook, or an entryway.

Features

Pleated folding-fan shade

White fabric over acrylic ribs spreads 24″ wide, throwing light up and through the pleats.

3 colors, foot-switch

Tap the foot pedal to cycle warm, neutral, and cool white — no reaching down to the cord.

Replaceable G9 LED

One standard G9 bulb you can swap yourself. Runs on AC 110–240V; slim base tucks into corners.

5. Variant / Control options — removed (single configuration: white shade + black body, one size) 6. Default config + custom request notice (“Ships as” facts removed — fully covered in Specifications)

Custom finish or bulk order

Want a different pole finish, shade color, or a project quantity? Email us for options and lead time.

7. Quality / warranty notice — removed (warranty + bulb in FAQ 5, build in specs) 8. Installation reference image — removed (none supplied) 9. Finish & Color Selection — removed (single fixed white-shade / black-body combo; custom handled above)

10. Available Configurations — single SKU, so dimension diagram only (no variant matrix)

Fan Floor Lamp Dimensions: 🔍 Tap to enlarge · 24 × 12 × 71″ (61 × 30 × 180 cm)

11. Trust signals row — removed (build/voltage in specs, warranty/returns in FAQ)

12. Specifications

Specifications

Overall size: 24″ W × 12″ D × 71″ H (61 × 30 × 180 cm)

Shade: Pleated folding-fan, white fabric over acrylic ribs (~24″ spread)

Body & base: Matte-black alloy pole on a weighted round base

Light source: 1 × G9 LED bulb, 10W, replaceable (included)

Color temperature: Three selectable — warm, neutral, and cool white

Switch: In-line foot pedal (on / color-cycle)

Voltage: AC 110–240V (use a 120V G9 bulb for North America)

Use / location: Indoor, dry locations only

Assembly: Tool-free, self-install; plugs into a standard outlet

13. Installation Notes: Installation Notes

No electrician needed — thread the pole into the base, attach the fan shade, screw in the G9 bulb, and plug in.

For North America, use a 120V-rated G9 LED bulb (10W or less) as the replacement.

Place against a wall or in a corner so the open fan throws light upward across the ceiling.

Keep the fabric shade dry; dust with a soft brush. Indoor, dry-location use only.

California Proposition 65: may contain chemicals known to California to cause cancer or reproductive harm. See p65warnings.ca.gov.

14. Downloads & Resources: Downloads & Resources

Spec Sheet Assembly Guide Ask a Question

15. FAQs (exactly 5): FAQs

Is this fan floor lamp bright enough to light a whole room?

With one 10W G9 LED, it gives accent and mood lighting — a soft uplight glow in a living room corner or bedroom, not a primary ceiling light. Pair it with overhead lighting for full-room brightness.

How do I switch between the three light colors?

Tap the foot pedal: the first tap is warm white, then each tap steps to neutral, cool white, and off. It restarts at warm white after being unplugged.

Does it come in other colors or shade finishes?

The standard build is a white pleated fan shade on a matte-black pole and base, in one size. Other pole finishes and shade colors can be quoted for custom or project orders — email us before ordering.

Does it need assembly or an electrician to set up?

No electrician. It assembles tool-free — fit the pole into the round base, attach the fan shade, screw in the G9 bulb, and plug into a standard outlet.

What happens if the LED bulb burns out?

The bulb is a standard replaceable G9 — swap it yourself with any G9 LED (use a 120V bulb in North America). The fixture and wiring are covered by warranty; email support replies within one business day.

16. Schema.org JSON-LD (GEO core)