Tiered Glass Ceiling Light

Description

A flush-mount ceiling light built around a three-tiered glass shade — the stepped silhouette draws on the wedding-cake forms of early-20th-century Art Deco lighting, finished with a polished chrome ring and a small chrome finial at the center. Light passes through the layered glass and softens at each step, casting an even, diffused glow downward.

At ⌀15.7″ × H6.3″, Tiered Glass sits low and clean against the ceiling — well-suited to entryways, hallways, walk-in closets, powder rooms (dry zones), and small bedrooms. Hardwired install, integrated LED, available in two glass colorways.

Features

Three-Tier Stepped Glass

Art Deco-inspired wedding-cake silhouette — three glass tiers diffuse light through layered curves.

Polished Chrome Ring

High-gloss chrome trim ring frames the glass and reflects ambient light from across the room.

Integrated 17W LED

Built-in LED · 2700K warm white · roughly 100W incandescent equivalent · ~50,000-hour rated life.

Two Colorways: White Glass + Chrome

Cool, clean palette — pairs with white walls, modern minimalist interiors, and contemporary architecture.

Beige Glass + Chrome

Warmer, vintage-modern palette — pairs with cream walls, Art Deco interiors, and warm-wood furniture.

Layered glass softens the light

Light passes through three glass tiers and is rounded off at each curve, producing a smooth even wash beneath the fixture rather than a single hard pool. Designed for general ambient ceiling light — not a focused spot.

About the polished chrome ring

The trim ring is chrome-finished metal — high-gloss and reflective. Wipe gently with a dry soft cloth for routine cleaning. Avoid abrasive cleaners and scouring pads, which can scratch the surface. Keep the fixture in dry indoor conditions to preserve the finish.

Indoor dry locations only

Tiered Glass is rated IP20 — suitable for living areas, hallways, bedrooms, closets, and powder rooms. Not rated for showers or wet locations. For powder rooms, install away from direct splash zones.

Integrated LED — long lifespan & ongoing light source service

The integrated LED is rated for roughly 50,000 hours of normal use. For peace of mind, we offer an

ongoing light source support service

Dimensions with clickable size diagram

Dimensions

Click to enlarge ↗: Diameter

⌀ 40 cm / 15.7″: Height

16 cm / 6.3″

Specifications

Materials

Glass · Polished Chrome Metal

Light source: Integrated LED · 2700K warm white · 17W

Bulb equivalent: ~100W incandescent

Rated LED life: ~50,000 hours

⌀15.7″ × H6.3″: ⌀40 × 16 cm

Voltage: AC 110–240V

Wiring: Hardwired · standard ceiling junction box

Control: Standard wall switch (not included)

Not dimmable: Mounting

Flush mount · flat ceiling: Ceiling height

8 ft+ recommended: IP rating

IP20 · Indoor dry locations only · Not waterproof

Certification: North America · EU · AU · Saudi Arabia

Colorways: Best for

Entryway · Hallway · Walk-in closet · Powder room (dry zone) · Small bedroom · Stairwell landing

Downloads: Spec Sheet

Installation Notes: Hardwired ceiling installation — a licensed electrician is recommended.

Connects to a standard ceiling junction box.

Controlled by an external wall switch — the integrated LED is not dimmable, so a standard on/off switch is sufficient.

Designed for flat ceilings. Not for sloped or vaulted ceilings.

For indoor dry locations only. Not suitable for showers or wet locations.

Frequently Asked Questions: What’s the difference between the two colorways?

Only the glass color. The chrome trim ring, the form, and the LED are identical between the two — White Glass reads cleaner and more modern; Beige Glass reads warmer and more vintage-modern.

Is it bright enough as a primary ceiling light?

Yes, for small to medium rooms. The 17W integrated LED puts out roughly the equivalent of a 100W incandescent — comfortable as the primary ceiling fixture in entryways, hallways, closets, powder rooms, and small bedrooms. For larger living spaces, consider pairing with additional lamps.

Is the lamp dimmable?

No. The integrated LED is not dimmable. Use a standard on/off wall switch — a dimmer switch will not work and may cause flicker or damage the LED driver.

Can I install it in a bathroom?

Only in dry zones. The fixture is rated IP20 — safe for powder rooms and bathroom areas away from direct water exposure, but not above a shower or anywhere subject to splash.

Can the LED be replaced?

The LED is integrated and not user-replaceable. It’s rated for ~50,000 hours of normal use — and we offer ongoing light source support, so we will always be able to provide a compatible replacement should it ever fail.