Description
A three-part composition in the spirit of mid-century executive lighting — a trapezoidal alabaster shade, a tapered black lacquered body, and a brass-plated ring base. Light comes from inside the alabaster and passes outward through the stone, picking up its natural cloud-like veining and casting a warm wash onto the desk below.
At ⌀15.9″ × H17.7″, Trapezia is sized for an executive desk, a wide dresser, or a generous nightstand. Plug-and-play with a 5 ft cord and a single push-button on the body — set it down, plug it in, press once for on, once for off. Ships with an E26 LED pre-installed.
Features
Trapezoidal Alabaster Shade
Natural alabaster cut into a soft trapezoidal silhouette — light passes through, revealing cloud-like veining unique to each piece.
Push-Button On/Off
A single mechanical button on the lacquered body — press once for on, once for off. No fumbling for a cord switch.
E26 LED Pre-Installed
Ships with a 2700K warm-white E26 LED — replaceable with any standard E26 bulb. Roughly 60W incandescent equivalent.
Natural alabaster — every shade is one of a kind
Each shade is cut from a unique alabaster block, so vein direction, cloud pattern, and translucency vary between lamps. The piece you receive will not be vein-identical to the photo.
About the brass-plated ring base
The ring base is brass-plated iron — finished to a brushed brass tone. Keep in dry indoor conditions and wipe gently with a dry soft cloth to maintain the finish.
About the lacquered metal body
The black tapered body is lacquered metal — high-gloss black finish over a metal core. Avoid abrasive cleaners; a soft, dry cloth is all that’s needed.
E26 LED — pre-installed and replaceable
Bulb: E26 · MEDIUM SCREW BASE · PRE-INSTALLED
1 × E26 LED · 2700K Warm White
A 2700K warm-white E26 LED ships pre-installed in your lamp — set it down, plug it in, press the button. Any standard E26 LED bulb will work for replacement.
Dimensions
Click to enlarge ↗: Diameter
15.9″ (40.5 cm): Height
17.7″ (45 cm): Cord
5 ft (1.5 m)
Specifications
Materials
Natural Alabaster · Lacquered Metal · Plated Iron
Light Source: 1 × E26 LED · 2700K warm white (Replaceable)
Bulb Equivalent: ~60W incandescent
Rated LED Life: ~25,000 hours
⌀15.9″ × H17.7″ (⌀40.5 × 45 cm)
Voltage: AC 110–240V
Wiring: Plug-and-play · standard wall outlet
Control: Mechanical push-button on body
IP Rating: IP20 · Indoor dry locations only
Certifications: North America · EU · AU · Saudi Arabia
Best For: Executive desk · Home office · Nightstand · Foyer console
Installation Notes: Plug-and-play — no electrician required. Connect to a standard wall outlet.
Place on a flat, dry tabletop.
Press the button on the body once for on, once for off.
For indoor dry locations only. Not suitable for bathrooms or damp rooms.
Handle the alabaster shade with care — natural stone can chip if struck.
Downloads Module: Downloads
Spec Sheet: Frequently Asked Questions
Is the bulb included?
Yes — a 2700K warm-white E26 LED ships pre-installed. When it eventually needs replacing, any standard E26 LED bulb in the same wattage range will work.
Is the brass ring solid brass?
No — it’s brass-plated iron, finished to a brushed brass tone. Structures it’s iron underneath to ensure stability. Keep it in dry indoor conditions to preserve the finish.
Is the button a touch sensor?
No. It’s a mechanical push-button — press once for on, press once for off. There’s no touch sensor and no dimming function.
Can I dim this lamp?
No. The push-button is a simple on/off control. The included E26 LED is not dimmable.
Will my lamp look exactly like the photo?
No two are identical. Alabaster vein direction and translucency vary between pieces — natural variation is part of the character of real stone.
Reviews
There are no reviews yet.