Victorian Fringe Table Lamp

Description

1. Headline + Intro: Victorian Fringe Table Lamp —

Beaded Botanical Shade, Walnut Wood Base

A vintage style bedside table lamp with a turned solid wood base in walnut finish and a six-panel fabric shade printed with green botanical leaves, edged in gold beaded trim and long beaded fringe. A single E27 bulb casts warm, filtered light through the panels and down through the fringe — soft ambient glow, not task light. At Ø7.9 in × H16.5 in (Ø20 × H42 cm), it fits standard nightstands, console tables, and dressers, and suits Victorian, bohemian, eclectic, art nouveau, and vintage farmhouse interiors. Common uses: bedroom bedside lamp, living room accent lamp, reading nook mood lighting, and side table décor.

2. Features

Features

Six-Panel Fabric Shade: Fabric panels with green botanical leaf print, gold beaded edge trim.

Beaded Fringe Trim: Long gold-tone beaded fringe hangs from each panel point.

Turned Wood Base: Solid wood spindle base in walnut finish, weighted for stability.

E27 Bulb Socket: Standard E27 base, one bulb. Use any E27 LED or filament bulb.

Plug-In Cord: US standard plug. Inline on/off switch. No electrician required.

Compact Footprint: Ø7.9 in shade, H16.5 in total — fits standard nightstands.

3. Fabric notice: About the Fabric Shade

Each shade is hand-assembled with sewn panels and hand-strung fringe. Small variations in stitching, bead spacing, and print alignment are normal — not defects. Clean with a soft brush or compressed air; do not wash or steam.

4. Bulb notice: Bulb Recommendation

For the warmest vintage glow, use a 2700K E27 LED filament bulb at 40W equivalent or lower. Vintage Edison bulbs (ST64, G80) enhance the warm-light effect.

5. Size card

Dimensions

Shade diameter: Ø20 cm / Ø7.9 in

Total height: 42 cm / 16.5 in

Base material: Solid wood

Base finish: Walnut

Click to enlarge ↗: 6. Bulb card

Light Source

E27 · 1 bulb · Bulb not included. Compatible with standard E27 LED, filament, and incandescent bulbs at 110–240V.

7. Spec table

Specifications

Product type: Table lamp (bedside / accent)

Style: Victorian / Bohemian / Vintage

Shade: Six-panel fabric with green botanical print, gold beaded trim and fringe

Base: Solid wood, turned spindle, walnut finish

Ø20 × H42 cm (Ø7.9 × H16.5 in)

Bulb base: E27 × 1 (not included)

Wattage: Max 40W (60W equiv. LED recommended)

Voltage: AC 110–240V

Installation: Plug-in, no electrician required

Switch: Inline on/off switch on cord

IP rating

IP20 Common values: IP20 = standard indoor / IP44 = damp / moisture-resistant / IP65 = bathroom & outdoor water-resistant

Use environment: Indoor, dry locations only

Certification: Listed · North America · CE · SAA · SASO · KC

8. Install notes: Installation Notes

Plug-and-play setup — no wiring or electrician required. Plug directly into a standard US wall outlet.

Turn on and off with the inline switch on the power cord.

Screw in an E27 bulb (not included) before plugging in. Do not exceed 40W incandescent or 60W LED equivalent.

For indoor use only. Not suitable for bathrooms, kitchens above the sink, or any damp location.

Place on a flat, stable surface. Keep the fabric shade away from heat sources and open flames.

9. Downloads: Downloads

10. FAQ: FAQ

What rooms and styles does this lamp work best in?

Best as a bedside lamp on a nightstand, an accent lamp on a living room side table, or a vanity lamp on a dresser. The Victorian shade and beaded fringe suit eclectic, bohemian, art nouveau, vintage farmhouse, and maximalist interiors. Also works in reading nooks and small entryway consoles.

What bulb should I use?

One E27 bulb, 40W max (incandescent) or 60W LED equivalent. A 2700K warm-white LED filament bulb or vintage Edison-style amber bulb (ST64, G80) gives the closest match to the antique look. Bulb not included.

Is the lamp dimmable?

No — the lamp has an inline on/off switch only. To dim it, use a dimmable E27 bulb with a plug-in dimmer module (sold separately). Wall dimmers do not work since the lamp is plug-in, not hardwired.

How do I clean the fabric shade and fringe?

Dust with a soft-bristle brush or compressed air, top to bottom. Gently run fingers through the fringe to release tangles. Do not wash, steam, or wipe with water — moisture stains the printed fabric and discolors the beads.

Is this lamp certified for use in North America?

Yes. It is listed for North America and also holds CE (Europe), SAA (Australia), SASO (Saudi Arabia), and KC (Korea) certifications. The lamp operates on AC 110–240V worldwide.